HMINLED 4FT 48INCH 1.2M LED Tube

Read the following sentences before installation, we suppose every customer has read before purchasing. The warranty policy is invalid once you don't operate as my instruction.

* Ballast must be removed or bypassed if you want to replace the traditional fluorescent with the HMINLED light shown on this page.

* The working environment should be dry and away from vapour.

The primary difference between double-end and single-end as below

* DOUBLE-END MEANS LIVE AND NEUTRAL LINE ARE CONNECTED TO DIFFERENT ENDS. CHOOSE THIS TYPE FOR REPLACING FLUORESCENT BULBS.

--------------------------------------------------------

* SINGLE-END CAN WORK ONLY WHEN LIVE AND NEUTRAL LINE ARE CONNECTED TO SAME END.

There are three potential risks if messed up

* THE LIGHT WILL BE BROKEN SOON

* THE FUSE BLOWS

* TRIGGER THE AIR SWITCH OR OTHER EQUIVALENT

Select the proper color temperature by clicking here to get the point from an article on this website.

As an experienced manufacturer in the LED industry. Here we publish the most concerned questions from buyers as follows. Welcome to consult us if you have any questions about our products.

Q: Can the LED tube replace the fluorescent lamp?

A: Sure, it can be installed into your traditional fluorescent fixture after the existing ballast is removed or bypassed. As far as I know, many 4ft fluorescent models used in the USA number is F32T8/XXX. So don't hesitate to buy this light shown on the page if you wanna save electricity bill while offering much illumination than before.

Q: How to wire if I am going to install your LED to a new fixture?

A: 110V or 277V Live wire at an end, Neutral at the opposite one.

Q: Does it fit for a non-shunted tomestomb or shunted?

A: Both are OK.

Q: Can the LED light tube be installed in commercial buildings?

A: Absolutely, it would work with 277V.

Q: Can I buy and use this light for T12 fixture?

A: Go ahead if that base is the same as T8, which shows in my picture, named G13. Only the diameter is different between T12 and T8. T12's is 1 1/3 inches, T8's is 1 inch.

Tips: T8 couldn't be installed in the T5 fixture.

About P.O BOX

Please fill in your physical address in order. Because P.O BOX is only recognized by USPS.

Related Specification of Product
Power	22 Watts
Operating Voltage	AC 85 -285V
Item Length	4ft / 1.2m
Connectors	Bi-Pin
Base	G13
Bulb Shape Code	T8, fitting for T12
Lumens	2400 LM
Customized Service Accepted ?	Yes
Trade Terms
Item Location	the United States and China. Customers in America will receive products in 3 - 5 days.
Retail Available ?	Yes
Wholesales Available ?	Yes
Free Shipping ?	Yes
IOSS Number	For customers from Europe, tell us your IOSS while ordering
Lead-time	1 day